Hiding the EVAP Canister

1997-2002 Jeep Wranglers

July, 2007

I pulled off the three hoses from the front of the EVAP canister. They are different sizes so I didn't bother to mark them. The canister is held on by one 13mm bolt at the front and a couple of rubber bushings at the back. Prying gently on the canister pops it out of the bushings.

The mounting studs on the canister are no longer required and make it too tall to put the shelf back on so off they come. It turns out that the studs are hollow at the base. I sealed the small openings up with some black silicon sealant.